[Numpy-discussion] build_clib error during Enable 3_2_1 installation

Gökhan Sever gokhansever@gmail....
Fri Aug 14 16:11:57 CDT 2009


Hello,

I fix the scipy installation issue. I usually checkout the whole ETS trunk
(ets co ETS) and do a "ets develop". After fullfilling the requirements it
was always successfully building the whole code-stack (well at least always
in Fedora 10). In this case it fails on Enable compilation step.

Don't know this error: "build_clib already run, it is too late to ensure
in-place build of build_clib" is due to my system files or a conflict with
the installed Python tools.

One more thing to note; there is build_clib.py file under
/usr/lib/python2.6/distutils/command. Might these be due to a conflict
between numpy's directive and Python's distutil?

On Thu, Aug 13, 2009 at 5:36 PM, Gökhan Sever <gokhansever@gmail.com> wrote:

> For some unknown reason, ets develop can't pass the following compilation
> point:
>
>
> g++: enthought/kiva/agg/src/kiva_rect.cpp
> ar: adding 8 object files to build/temp.linux-i686-2.6/libkiva_src.a
> running build_ext
> build_clib already run, it is too late to ensure in-place build of
> build_clib
> Traceback (most recent call last):
>  File "setup.py", line 327, in <module>
>    **config
>  File "/home/gsever/Desktop/python-repo/numpy/numpy/distutils/core.py",
> line 186, in setup
>    return old_setup(**new_attr)
>  File "/usr/lib/python2.6/distutils/core.py", line 152, in setup
>    dist.run_commands()
>  File "/usr/lib/python2.6/distutils/dist.py", line 975, in run_commands
>    self.run_command(cmd)
>  File "/usr/lib/python2.6/distutils/dist.py", line 995, in run_command
>    cmd_obj.run()
>  File
> "/home/gsever/Desktop/python-repo/numpy/numpy/distutils/command/build_ext.py",
> line 74, in run
>    self.library_dirs.append(build_clib.build_clib)
> UnboundLocalError: local variable 'build_clib' referenced before assignment
> Traceback (most recent call last):
>  File "/usr/bin/ets", line 8, in <module>
>    load_entry_point('ETSProjectTools==0.6.0.dev-r24434',
> 'console_scripts', 'ets')()
>  File
> "/usr/lib/python2.6/site-packages/ETSProjectTools-0.5.1-py2.6.egg/enthought/ets/ets.py",
> line 152, in main
>    args.func(args, cfg)
>  File
> "/usr/lib/python2.6/site-packages/ETSProjectTools-0.5.1-py2.6.egg/enthought/ets/develop.py",
> line 76, in main
>    checkouts.perform(command, dry_run=args.dry_run)
>  File
> "/usr/lib/python2.6/site-packages/ETSProjectTools-0.5.1-py2.6.egg/enthought/ets/tools/checkouts.py",
> line 126, in perform
>    '%s' % project)
> RuntimeError: Unable to complete command for project:
> /home/gsever/Desktop/python-repo/ETS_3.3.1/Enable_3.2.1
>
>
> Any suggestions?
>
>
>
> ##################################################################
> [gsever@ccn Desktop]$ python -c 'from numpy.f2py.diagnose import run;
> run()'
> ##################################################################
> ------
> os.name='posix'
> ------
> sys.platform='linux2'
> ------
> sys.version:
> 2.6 (r26:66714, Jun  8 2009, 16:07:26)
> [GCC 4.4.0 20090506 (Red Hat 4.4.0-4)]
> ------
> sys.prefix:
> /usr
> ------
>
> sys.path=':/usr/lib/python2.6/site-packages/foolscap-0.4.2-py2.6.egg:/usr/lib/python2.6/site-packages/Twisted-8.2.0-py2.6-linux-i686.egg:/home/gsever/Desktop/python-repo/ipython:/home/gsever/Desktop/python-repo/numpy:/home/gsever/Desktop/python-repo/matplotlib/lib:/usr/lib/python2.6/site-packages/Sphinx-0.6.2-py2.6.egg:/usr/lib/python2.6/site-packages/docutils-0.5-py2.6.egg:/usr/lib/python2.6/site-packages/Jinja2-2.1.1-py2.6-linux-i686.egg:/usr/lib/python2.6/site-packages/Pygments-1.0-py2.6.egg:/usr/lib/python2.6/site-packages/xlwt-0.7.2-py2.6.egg:/usr/lib/python2.6/site-packages/spyder-1.0.0beta1-py2.6.egg:/usr/lib/python2.6/site-packages/PyOpenGL-3.0.0c1-py2.6.egg:/home/gsever/Desktop/python-repo/ETS_3.3.1/EnthoughtBase_3.0.4:/home/gsever/Desktop/python-repo/ETS_3.3.1/TraitsBackendWX_3.2.1:/home/gsever/Desktop/python-repo/ETS_3.3.1/ETSProjectTools_0.6.0:/home/gsever/Desktop/python-repo/ETS_3.3.1/Chaco_3.2.1:/home/gsever/Desktop/python-repo/ETS_3.3.1/ETS_3.3.1:/home/gsever/Desktop/python-repo/ETS_3.3.1/TraitsGUI_3.1.1:/home/gsever/Desktop/python-repo/ETS_3.3.1/Traits_3.2.1:/home/gsever/Desktop/python-repo/ETS_3.3.1/BlockCanvas_3.1.1:/usr/lib/python26.zip:/usr/lib/python2.6:/usr/lib/python2.6/plat-linux2:/usr/lib/python2.6/lib-tk:/usr/lib/python2.6/lib-old:/usr/lib/python2.6/lib-dynload:/usr/lib/python2.6/site-packages:/usr/lib/python2.6/site-packages/Numeric:/usr/lib/python2.6/site-packages/PIL:/usr/lib/python2.6/site-packages/gst-0.10:/usr/lib/python2.6/site-packages/gtk-2.0:/usr/lib/python2.6/site-packages:/usr/lib/python2.6/site-packages/wx-2.8-gtk2-unicode'
> ------
> Failed to import numarray: No module named numarray
> Found Numeric version '24.2' in
> /usr/lib/python2.6/site-packages/Numeric/Numeric.pyc
> Found new numpy version '1.4.0.dev' in
> /home/gsever/Desktop/python-repo/numpy/numpy/__init__.pyc
> Found f2py2e version '2' in
> /home/gsever/Desktop/python-repo/numpy/numpy/f2py/f2py2e.pyc
> Found numpy.distutils version '0.4.0' in
> '/home/gsever/Desktop/python-repo/numpy/numpy/distutils/__init__.pyc'
> ------
> Importing numpy.distutils.fcompiler ... ok
> ------
> Checking availability of supported Fortran compilers:
> GnuFCompiler instance properties:
>  archiver        = ['/usr/bin/g77', '-cr']
>  compile_switch  = '-c'
>  compiler_f77    = ['/usr/bin/g77', '-g', '-Wall', '-fno-second-
>                    underscore', '-fPIC', '-O3', '-funroll-loops']
>  compiler_f90    = None
>  compiler_fix    = None
>  libraries       = ['g2c']
>  library_dirs    = []
>  linker_exe      = ['/usr/bin/g77', '-g', '-Wall', '-g', '-Wall']
>  linker_so       = ['/usr/bin/g77', '-g', '-Wall', '-g', '-Wall', '-
>                    shared']
>  object_switch   = '-o '
>  ranlib          = ['/usr/bin/g77']
>  version         = LooseVersion ('3.4.6')
>  version_cmd     = ['/usr/bin/g77', '--version']
> Gnu95FCompiler instance properties:
>  archiver        = ['/usr/bin/gfortran', '-cr']
>  compile_switch  = '-c'
>  compiler_f77    = ['/usr/bin/gfortran', '-Wall', '-ffixed-form', '-fno-
>                    second-underscore', '-fPIC', '-O3', '-funroll-loops']
>  compiler_f90    = ['/usr/bin/gfortran', '-Wall', '-fno-second-underscore',
>                    '-fPIC', '-O3', '-funroll-loops']
>  compiler_fix    = ['/usr/bin/gfortran', '-Wall', '-ffixed-form', '-fno-
>                    second-underscore', '-Wall', '-fno-second-underscore',
> '-
>                    fPIC', '-O3', '-funroll-loops']
>  libraries       = ['gfortran']
>  library_dirs    = []
>  linker_exe      = ['/usr/bin/gfortran', '-Wall', '-Wall']
>  linker_so       = ['/usr/bin/gfortran', '-Wall', '-Wall', '-shared']
>  object_switch   = '-o '
>  ranlib          = ['/usr/bin/gfortran']
>  version         = LooseVersion ('4.4.0')
>  version_cmd     = ['/usr/bin/gfortran', '--version']
> Fortran compilers found:
>  --fcompiler=gnu    GNU Fortran 77 compiler (3.4.6)
>  --fcompiler=gnu95  GNU Fortran 95 compiler (4.4.0)
> Compilers available for this platform, but not found:
>  --fcompiler=absoft   Absoft Corp Fortran Compiler
>  --fcompiler=compaq   Compaq Fortran Compiler
>  --fcompiler=g95      G95 Fortran Compiler
>  --fcompiler=intel    Intel Fortran Compiler for 32-bit apps
>  --fcompiler=intele   Intel Fortran Compiler for Itanium apps
>  --fcompiler=intelem  Intel Fortran Compiler for EM64T-based apps
>  --fcompiler=lahey    Lahey/Fujitsu Fortran 95 Compiler
>  --fcompiler=nag      NAGWare Fortran 95 Compiler
>  --fcompiler=pg       Portland Group Fortran Compiler
>  --fcompiler=vast     Pacific-Sierra Research Fortran 90 Compiler
> Compilers not available on this platform:
>  --fcompiler=hpux     HP Fortran 90 Compiler
>  --fcompiler=ibm      IBM XL Fortran Compiler
>  --fcompiler=intelev  Intel Visual Fortran Compiler for Itanium apps
>  --fcompiler=intelv   Intel Visual Fortran Compiler for 32-bit apps
>  --fcompiler=mips     MIPSpro Fortran Compiler
>  --fcompiler=none     Fake Fortran compiler
>  --fcompiler=sun      Sun or Forte Fortran 95 Compiler
> For compiler details, run 'config_fc --verbose' setup command.
> ------
> Importing numpy.distutils.cpuinfo ... ok
> ------
> CPU information: CPUInfoBase__get_nbits getNCPUs has_mmx has_sse
> has_sse2 has_sse3 has_ssse3 is_32bit is_Intel is_i686 ------
>
>
>
> --
> Gökhan
>



-- 
Gökhan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mail.scipy.org/pipermail/numpy-discussion/attachments/20090814/905cb36e/attachment-0001.html 


More information about the NumPy-Discussion mailing list