[Numpy-discussion] polyfit with fixed points

Charles R Harris charlesr.harris@gmail....
Thu Mar 7 11:07:15 CST 2013


On Thu, Mar 7, 2013 at 9:22 AM, eat <e.antero.tammi@gmail.com> wrote:

> Hi,
>
> On Thu, Mar 7, 2013 at 1:52 AM, Jaime Fernández del Río <
> jaime.frio@gmail.com> wrote:
>
>> On Tue, Mar 5, 2013 at 5:23 AM, Charles R Harris <
>> charlesr.harris@gmail.com> wrote:
>>
>>>
>>>
>>> On Tue, Mar 5, 2013 at 12:41 AM, Jaime Fernández del Río <
>>> jaime.frio@gmail.com> wrote:
>>>
>>>> On Mon, Mar 4, 2013 at 8:37 PM, Charles R Harris <
>>>> charlesr.harris@gmail.com> wrote:
>>>>
>>>>>
>>>>> There are actually seven versions of polynomial fit, two for the usual
>>>>> polynomial basis, and one each for Legendre, Chebyshev, Hermite, Hermite_e,
>>>>> and Laguerre ;)
>>>>>
>>>>
>>>> Correct me if I am wrong, but the fitted function is the same
>>>> regardless of the polynomial basis used. I don't know if there can be
>>>> numerical stability issues, but chebfit(x, y, n) returns the same as
>>>> poly2cheb(polyfit(x, y, n)).
>>>>
>>>> In any case, with all the already existing support for these special
>>>> polynomials, it wouldn't be too hard to set the problem up to calculate the
>>>> right coefficients directly for each case.
>>>>
>>>>
>>>>> How do you propose to implement it? I think Lagrange multipliers is
>>>>> overkill, I'd rather see using the weights (approximate) or change of
>>>>> variable -- a permutation in this case -- followed by qr and lstsq.
>>>>>
>>>>
>>>> The weights method is already in place, but I find it rather inelegant
>>>> and unsatisfactory as a solution to this problem. But if it is deemed
>>>> sufficient, then there is of course no need to go any further.
>>>>
>>>> I hadn't thought of any other way than using Lagrange multipliers, but
>>>> looking at it in more detail, I am not sure it will be possible to
>>>> formulate it in a manner that can be fed to lstsq, as polyfit does today.
>>>> And if it can't, it probably wouldn't make much sense to have two different
>>>> methods which cannot produce the same full output running under the same
>>>> hood.
>>>>
>>>> I can't figure out your "change of variable" method from the succinct
>>>> description, could you elaborate a little more?
>>>>
>>>
>>> I think the place to add this is to lstsq as linear constraints. That
>>> is, the coefficients must satisfy B * c = y_c for some set of equations B.
>>> In the polynomial case the rows of B would be the powers of x at the points
>>> you want to constrain. Then do an svd on B, B = u * d * v. Apply v to the
>>> design matrix of the unconstrained points A'  = A * v.T so that B' becomes
>>> u * d. The coefficients are now replaced by new variables c' with the
>>> contraints in the first two columns. If there are, say, 2 constraints, u *
>>> d will be 2x2. Solve that equation for the first two constraints then
>>> multiply the first two columns of the design matrix A' by the result and
>>> put them on the rhs, i.e.,
>>>
>>>     y = y - A'[:, :2] * c'[:2]
>>>
>>> then solve the usual l least squares thing with
>>>
>>>     A[:, 2:] * c'[2:] = y
>>>
>>> to get the rest of the transformed coefficients c'. Put the coefficients
>>> altogether and multiply with v^T to get
>>>
>>>     c = v^T * c'
>>>
>>
>> Very nice, and works beautifully! I have tried the method you describe,
>> and there are a few relevant observations:
>>
>>  1. It gives the exact same result as the Lagrange multiplier approach,
>> which is probably expected, but I wasn't all that sure it would be the case.
>>  2. The result also seems to be to what the sequence of fits giving
>> increasing weights to the fixed points converges to. This image
>> http://i1092.photobucket.com/albums/i412/jfrio/image.png is an example.
>> In there:
>>      * blue crosses are the data points to fit to
>>      * red points are the fixed points
>>      * blue line is the standard polyfit
>>      * red line is the constrained polyfit
>>      * cyan, magenta, yellow and black are polyfits with weights of 2, 4,
>> 8, 16 for the fixed points, 1 for the rest
>>
>> Seeing this last point, probably the cleanest, least disruptive
>> implementation of this, would be to allow np.inf values in the weights
>> parameter, which would get filtered out, and dealt with in the above manner.
>>
>
> Just to point out that a very simple approach is where one just multiply
> the constraints with big enough number M, like:
>
> In []: def V(x, n= None):
>    ....:     """Polynomial package compatible Vandermonde 'matrix'"""
>    ....:     return vander(x, n)[:, ::-1]
>

Just to note, there is a polyvander in numpy.polynomial.polynomial, and a
chebvander in numpy.polynomial.chebyshev, etc.

<snip>

Chuck
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mail.scipy.org/pipermail/numpy-discussion/attachments/20130307/0d0ab4e3/attachment.html 


More information about the NumPy-Discussion mailing list